8 PON PORT OLT

FBEOL- 8P complies with IEEE802.3ah and P.R.C intercommunication standard, YD/T 1475-2006, support CTC20/2.1, automatically discovers and corporate with ONUs of different manufactures.

Main Advantage

  • FBEOL- 8P supports IEEE802.3ah and PRC community Industry Standard (YD/T 1475-2006)
  • System capacity: Fiberon FBEOL- 8P can support one to eight EPON systems simultaneously, up to 512 ONUs and the 1:64 coupling ratio.
  • Uplink interface: Its flexible design supports various MAN interface type group. The optical ports or the electrical ports are selected according to network conditions.
  • Device size: A IU device occupies a little space and consumes little power, decreasing the function cost of the service.

Enquiry Datasheet



Main Advantage

FBEOL- 8P is an Optical network device series that is suitable for the current market; one Fiberon FBEOL - 8P supports up to four EPON system, so it has the following advantages.

  • FBEOL- 8P supports IEEE802.3ah and PRC community Industry Standard (YD/T 1475-2006)
  • System capacity: Fiberon FBEOL- 8P can support one to eight EPON systems simultaneously, up to 512 ONUs and the 1:64 coupling ratio.
  • Uplink interface: Its flexible design supports various MAN interface type group. The optical ports or the electrical ports are selected according to network conditions.
  • Device size: A IU device occupies a little space and consumes little power, decreasing the function cost of the service.
  • Pretecting the bus optical: Fiberon FBEOL - 8P supports that the link can be automatically switched to protect the optical fiber when trouble occurs in the optical fiber
  • It is highly reliable and powered by two power sources.
Attributes FBEOL - 8P
System's capacity Maximum coupling ratio, 1:64
Support 32K MAC Address
128G backplane bandwidth
Interface 4GE SFP port, 4GE Combo ports,
4 10GE SFP + ports,
8 fixed EPON ports
PON interface A 1Gbps transmission rate with downlink and uplink symmetry
Average luminous power on the PON port: +2dbm ~+7dbm
Optical acceptance senitivity of the PON port: not less than-30dBm
Security : ONU authentication mechanism
Standard IEEE802.3ah
IEEE802.1D,Spanning Tree
IEEE802.1Q, VLAN
IEEE802.1w, RSTP
IEEE802.3ad physical link static/dynamic aggregation (LACP)
Ethernet - 11, Ethernet - SNAP
IEEE802.3ad VLAN Stacking (Q in Q)
Qos Backpressure flow control (half duplex)
IEEE802.3x Flow control (full duplex)
IEEE802.1p, Cos
WR, SP and FIFO
Supporting the Mark/Remark priority of 802.1p/DSCP
Limiting the uplink/downlink rate based on each ONU
Supporting DBA and SLA
VLAN Port-based VLAN
GVRP
IEEE802.1Q VLAN relay
Supporting Q in Q and flexible Q in Q
Multicast 1GMP v1/v2/v3
IGMP Snooping
The Layer 2 switching Support VLAN, protocol VLAN, VLAN TAG / UNTAG, VLAM transparent
transmission, VLAN conversion, support 4096 VLAN
Supports 802.3ad link aggregation (TRUNK)
Support QOS based on port, VID, TOS, MAC address
Support for IGMP Snooping
Support 802.1x traffic control
Support port performance statistics
Network management capability Port status monitoring, configuration management
Layer 2 switching configuration management, such as VLAN, TRUNK, RSTP, IGMP, QOS and so on
EPON function configuration managment, such as: DBA bandwidth
allocation, ONU authentication, ACL configuration, QOS, etc.
Access ONU configuration and management (see ONU specificatons)
User Management Alarm Management
Physical Characters 442.5mm(W) x350mm(D) x 44mm(H)
Installation: A 19-inch cabinet
Weight: <2kg
Environment requirements Working condiion: 0C-55C; 10%-85% no condensation
Storage conditon: -40C-80C; 5%-95%; no condensation
Power Source Input voltage: AC100-240V
Input frequency : 47-63Hz
Supporting power input from two power sources
input current: 1A/230V
Power consumption: Up to 60W